Zopo Speed 7 Plus ZP952 spare parts

    There are 7 products.

    Zopo Speed 7 Plus ZP952 Repuestos Technical Specifications

    The Zopo Speed 7 Plus ZP952 is a smartphone that delivers powerful performances equipped with robust hardware. Here are some of its most important technical characteristics:

    • Screen: 5.5 inches IPS, 1080 x 1920 pixels, multitouch
    • Processor: Mediatek MT6753, Octa-core 1.5 GHz
    • RAM: 3...

    Zopo Speed 7 Plus ZP952 Repuestos Technical Specifications

    The Zopo Speed 7 Plus ZP952 is a smartphone that delivers powerful performances equipped with robust hardware. Here are some of its most important technical characteristics:

    • Screen: 5.5 inches IPS, 1080 x 1920 pixels, multitouch
    • Processor: Mediatek MT6753, Octa-core 1.5 GHz
    • RAM: 3 GB
    • Storage: 16 GB internal expandable via microSD
    • Battery: 3000 mAh, Li-Ion
    • Operating System: Android 5.1 Lollipop

    Instructions for Replacing Zopo Speed 7 Plus ZP952 Repuestos

    Replacing parts of Zopo Speed 7 Plus ZP952 requires professional expertise due to the technicality of the task. Remember, any wrong step might lead to permanent damages to your device.

    Tools needed

    • Screwdriver
    • Spudger
    • Plastic opening tools

    Replacement Steps

    STEP 1: Turn off your Zopo Speed 7 Plus ZP952.

    STEP 2: Remove the back cover using plastic opening tools.

    STEP 3: Next, disconnect the battery connector from the motherboard. Remove the screws securing the battery and take it out.

    STEP 4: Remove the screws securing the motherboard. Then carefully lift it, being cautious about the connectors attached to it.

    STEP 5: Depending on the part you need to replace, follow the appropriate steps:

    • For screen: Disconnect the screen connector from the motherboard. Then, gently lift the screen from the edges, replace, and reconnect.
    • For RAM: Locate the RAM on the motherboard. Unclip from its holder and replace.
    • For processor: The processor is soldered onto the motherboard. If it's faulty, you'll need to replace the entire motherboard.
    • For storage: The storage is also hardwired to the motherboard. Like the processor, a faulty storage means you'll need a new motherboard.
    • For battery: Just like in step 3, disconnect the battery, replace it with the new one, and reconnect it to the motherboard.

    STEP 6: After replacing the faulty part, assemble the phone following the disassembly steps but in reverse order.

    Note: If you don't possess the necessary technical knowledge for phone repair, consider hiring a professional to avoid damaging your device.

    Less
    More
    Showing 1 - 7 of 7 items