Zopo ZP320 spare parts

Zopo ZP320 Repuestos Technical Specifications

The Zopo ZP320 is a high-performance smartphone by Zopo Mobile. It's an entry-level 4G smartphone that offers powerful performance and excellent photo shooting experience. See below for the technical specifications.

• Display: 5.0" TFT IPS Resolution of 854 x 480
• Processor: MTK6582M Quad-core 1.3GHz
• RAM: 1GB
• Internal Storage: 8GB, expandable to 64GB with MicroSD
• Camera: Rear 8.0 MP, Front 2.0 MP
• Battery: 2300mAh Detachable Li-polymer battery
• OS: Android 4.4

Zopo ZP320 Repuestos Replacement Instructions

Below are detailed instructions to replace Zopo ZP320 repuestos (parts). Proper preparation and careful procedures will ensure a successful repair.

Tools Required

• Small Phillips Screwdriver
• Plastic Screen Opening Tools
• Spudger Tool
• Heat Gun or Blow Dryer

Steps to replace Zopo ZP320 Repuestos

1. Power off your Zopo ZP320 and remove SIM card and micro SD card.

2. Start by removing the back cover. Gently insert a plastic tool into the gap between the back cover and the main body to pry up the back cover.

3. Use a small Phillips screwdriver to unscrew the screws securing the battery connector board to the motherboard and remove it. Afterwards, remove the battery.

4. Use the plastic tool to disconnect the camera, microphone, speaker, and LCD Screen connectors from the motherboard.

5. Unscrew all the screws that are securing the motherboard and gently lift the motherboard out of the phone case.

6. If you have to replace the screen, use a heat gun or blow dryer to heat the edges of the display to soften the adhesive. However, be careful not to overheat the device as it might damage the internal components.

7. Carefully insert a thin plastic tool between the display and the frame and move it along the sides to detach the screen away from the adhesive. Make sure to be very gentle to avoid breaking the display.

8. Once the screen has been removed, you can replace it with a new one. Place the new screen on the frame and press firmly but gently to make sure the adhesive sticks properly.

9. Reassemble the Zopo ZP320 by following the steps in reverse order.

Remember: Each disassembly and reassembly process has potential for device damage. Ensure you are properly grounded, working on a clean surface, and handle components with care.