ZTE Avail 2 Z992 spare parts

ZTE Avail 2 Z992 Specifications

The ZTE Avail 2 Z992 is a smartphone developed by ZTE Corporation. The phone stands out because of its simple yet functional features and affordable price. This device focuses on delivering value to its users.

Technical Characteristics:

• Operating System: Android 4.1 Jelly Bean
• Processor: 1GHz single-core
• Display: 3.5 inches, 320 x 480 pixels
• Memory: 4GB storage, microSD card slot
• Camera: 2 MP rear
• Battery: 1400mAh Li-Ion

ZTE Avail 2 Z992 Repuestos Replacement Instructions

Here are step-by-step instructions on how to replace the ZTE Avail 2 Z992 repuestos.

Tools You'll Need:

• Phillips #00 Screwdriver
• Plastic Opening Tools
• New ZTE Avail 2 Z992 repuestos

Steps for Replacement:

Before proceeding with the replacement, make sure your device is powered off and unplug it from the charger if connected.

• Step 1

  Remove the back cover of the phone by sliding the plastic opening tool along the seam between the back cover and the phone body.

• Step 2

  Remove the battery by lifting it up from the bottom edge.

• Step 3

  Using the Phillips #00 Screwdriver, remove the six screws securing the back frame.

• Step 4

  Lift the back frame from the phone.

• Step 5

  Locate the ZTE Avail 2 Z992 repuestos to be replaced and gently take them out.

• Step 6

  Place the new ZTE Avail 2 Z992 repuestos into the correct location.

• Step 7

  Reassemble the phone in reverse order of disassembly.

Please note that while these are general instructions, the specific replacement procedure may differ slightly based on the exact part being replaced. Always refer to the particular part's included instructions, if available.