ZTE Axon 11 5G spare parts

ZTE Axon 11 5G Technical Features

The ZTE Axon 11 5G repuestos boasts numerous impressive technical specifications. Below are some key features:

• Processor: Qualcomm SDM765 Snapdragon 765G
• Display: AMOLED 6.47 inches, 1080 x 2340 pixels
• Memory: 128GB/256GB storage, 6GB/8GB RAM
• Battery: Non-removable Li-Po 4000 mAh battery
• Camera: Quad camera setup of 64MP + 8MP + 2MP + 2MP
• Operating System: Android 10, MiFavor 10

Instructions for Replacing ZTE Axon 11 5G Repuestos

Tools Needed

• Spudger
• Screwdriver
• Tweezers
• Plastic Opening Tools

Steps

Here are the detailed steps to replace the ZTE Axon 11 5G repuestos:

• Step 1: Turn off your phone before starting the disassembly process.
• Step 2: Use a spudger or plastic opening tools to gently pry and remove the back cover. Start from the bottom edge moving upward.
• Step 3: Remove the screws using the screwdriver. Make sure to keep them in a safe place as you will need them later.
• Step 4: Use tweezers or a spudger to disconnect the battery connector.
• Step 5: Carefully remove the battery. Be mindful not to puncture or bend the battery.
• Step 6: Disconnect the cable connectors for the camera, display, and other repuestos that need replacement.
• Step 7: Install the new repuestos and reattach the cable connectors.
• Step 8: Replace the battery and connect the battery connector.
• Step 9: Replace the screws and the back cover.
• Step 10: Turn on the device to check if the new repuestos are functioning properly.

Please remember, attempting these repairs could void your warranty and damage your device. If you are unsure, it is better to trust a repair professional.