ZTE Axon 40 Ultra spare parts

ZTE Axon 40 Ultra Repuestos Technical Specifications

The replacement parts for the ZTE Axon 40 Ultra are designed to maintain the excellent performance of the device. Below are their technical specifications:

• Display: Dynamic AMOLED 2X, HDR10+, 6.9 inches, 1080 x 2400 pixels.
• Battery: Li-Po 4700 mAh, non-removable, fast charging 65W.
• Back Camera: 48 MP, f/1.8, Laser AF, OIS; PDAF, 12 MP; Periscope Telephoto 48 MP, f/4.1, OIS, 5x optical zoom; Ultra wide angle.
• Front Camera: 16 MP, f/2.0, wide.
• Sensor: Under-display fingerprint sensor, accelerometer, gyro, proximity, compass

Instructions for Replacing ZTE Axon 40 Ultra Repuestos

The following steps guide you on how to replace various parts of the ZTE Axon 40 Ultra.

Battery Replacement

1. Switch off the device.
2. Remove the back cover with a plastic opening tool or finger nail.
3. Disconnect the battery connector using the plastic spudger tool.
4. Remove the battery, lifting it gently as it may be affixed with adhesive.
5. Place the new battery, carefully aligning the connector with the mainboard socket.
6. Refasten the back cover.

Display Replacement

1. Switch off the device.
2. Remove the back cover.
3. Disconnect the display cable connector from the mainboard.
4. Remove the old display panel.
5. Place the new display panel, connecting it to the mainboard with the cable.
6. Reaffix the back cover.

Make sure to perform all operations cautiously, especially when dealing with the display and mainboard connectors.