Zte Blade A31 Plus spare parts

Zte Blade A31 Plus Technical Specifications

The Zte Blade A31 Plus stands out for having a range of interesting specs. Below are the key technical characteristics of this device:

• Display: 6.55 inch, 1600 x 720 pixels
• Processor: Unisoc Tiger T310 quad-core
• RAM: 3 GB
• Storage: 128 GB, expandable via microSD card
• Operating System: Android 11
• Battery: 5000 mAh
• Camera: 13 MP rear, 8 MP front

Instructions for Replacing Zte Blade A31 Plus Repuestos

Before proceeding, you should have all the necessary tools including a screwdriver set, plastic prying tool, suction cup, tweezers, etc. Always turn off your mobile before starting a repair process.

Screen Replacement

• Step 1: Use a heat gun or hairdryer to soften the adhesive around the edges of the display. This makes it easier to open the device.
• Step 2: Place a suction cup on the front of the display and gently pull it upwards. Use a plastic prying tool to create a gap and then slide around the device to free the display assembly.
• Step 3:` Unscrew bolts binding the screen connector to the motherboard. Detach the connector with a pryr.
• Step 4: Dispose of the faulty screen and connect the new one. Reassemble by following the steps in reverse order.

Battery Replacement

• Step 1: Like above, start by loosening the adhesive holding the screen.
• Step 2: After separating the display from the body, locate the battery connector on the motherboard. Detach it carefully.
• Step 3: If there is adhesive below the battery, use a heat gun to soften it. Then, slowly lift the battery using a prying tool.
• Step 4: Set the new battery in place and reattach the battery connector to the motherboard. Reassemble your phone by properly reattaching the display to the phone body.

Note: Be careful not to puncture the battery while removing it. Extreme heat from the heat gun can damage internal components. Always take necessary precautions.