ZTE Blade A52 Lite spare parts

    There are 5 products.

    ZTE Blade A52 Lite Technical Specifications

    The ZTE Blade A52 Lite is a dynamic Android-based mobile device with an impressive range of features. Below are some of its key technical characteristics:

    • Display: 6.95 inches, 720 x 1640 pixels, IPS LCD
    • OS: Android 11
    • Processor: MediaTek Helio A20
    • Memory: 3GB RAM, 64GB internal storage
    • Camera: Triple...

    ZTE Blade A52 Lite Technical Specifications

    The ZTE Blade A52 Lite is a dynamic Android-based mobile device with an impressive range of features. Below are some of its key technical characteristics:

    • Display: 6.95 inches, 720 x 1640 pixels, IPS LCD
    • OS: Android 11
    • Processor: MediaTek Helio A20
    • Memory: 3GB RAM, 64GB internal storage
    • Camera: Triple rear camera 13MP + 2MP + 2MP, Front 8MP
    • Battery: 5000 mAh, non-removable

    ZTE Blade A52 Lite Repuestos Replacement Guide

    Before commencing the replacement of any part, please ensure you have the necessary tools including a screwdriver, tweezers, prying tool, and new spare parts.

    Instructions

    • Turn off the device: Before starting with the repair or replacement process, ensure that your ZTE Blade A52 Lite is off.
    • Remove the SIM card tray: Use an ejector tool to remove the SIM card tray from the side of the phone.
    • Open the phone: Apply heat to the edges of the back cover, then use a prying tool to gently lift it off.
    • Unscrew the plate: Once the back cover is removed, you will see a plate that covers the battery and internal parts. Unscrew all visible screws using a suitable screwdriver.
    • Disconnect the battery: Locate the battery connector and carefully unplug it.
    • Remove the part: Depending on the part you are replacing - whether it's the screen, camera, or any other part, carefully remove the defective part. Always remember the location of all screws and components removed.
    • Install the new part: Replace the part that was removed with the new one. Ensure that it is securely and correctly connected.
    • Reassemble the phone: Once the new part is in place, reconnect the battery, screw back the plate and carefully clip the back cover back onto the phone. Insert the SIM card tray.
    • Test the phone: Turn on the device to ensure that the replaced part is now functioning correctly.

    Be aware that replacing parts on your own could void the warranty of your mobile device. In case of uncertainty, it is recommended to contact a professional repair service.

    Less
    More
    Showing 1 - 5 of 5 items