ZTE Blade A602 spare parts

ZTE Blade A602 Repuestos Technical Specifications

The ZTE Blade A602 repuestos, or replacement parts, are specifically designed to correct any hardware malfunctions on your ZTE Blade A602 smartphone. Below, we outline the key technical details for primary components.

• Screen: A 5.5-inch HD (720x1280 pixels) touchscreen display that supports multi-touch.
• Battery: A powerful Li-Ion 3000 mAh, non-removable battery designed for long-lasting use.
• Camera: A 8.0MP rear camera replacement part, along with a 2.0MP front camera part.
• Home Button: This is a vital part of the device, allowing you to return to the home screen from any application or setting.

Instructions for Replacing ZTE Blade A602 Repuestos

Here are the steps to replace various ZTE Blade A602 repuestos. Note that it is important to have a basic understanding of smartphone hardware before attempting to do this on your own.

Screen Replacement

• Power off the device to prevent any short circuits and remove the SIM and memory card.
• Remove the back housing and disconnect the battery connector.
• Remove the battery and then carefully undo the screws to remove the front housing.
• Replace the faulty screen with a new one and reverse the process to reassemble the device.

Battery Replacement

• Switch off the device and remove the back housing, after that take out the SIM and memory card.
• Disconnect the battery connector and carefully pry out the old battery.
• Select a new, compatible battery for the ZTE Blade A602 and place it into the battery slot.
• Reconnect the battery connector and reassemble the device.

Camera Replacement

• Start by switching off the device, remove the back housing and disconnect the battery connector.
• Locate the front and rear cameras, remove the screws holding them in place and carefully lift them out.
• Boasting high-resolution, the replacement camera part should be delicately installed in its place.
• Finally, replace all the screws, reconnect all connectors and reassemble.

Avoid forcing any pieces to fit when reassembling as this might cause further damage. Always exercise caution when working with electronics.