ZTE Blade A7 2020 spare parts

ZTE Blade A7 2020 Tech Specs

The ZTE Blade A7 is a smartphone released in 2020 with the following technical specifications:

• Display: 6.088-inch HD+ IPS screen
• Processor: Spreadtrum SC9863A
• RAM: 2 GB
• Storage: 32 GB
• Battery: 4000 mAh
• Camera: 16 MP and 8 MP
• Operating System: Android 9

Replacing ZTE Blade A7 2020 Repuestos

Set up your Workspace

Before starting, ensure you have a clean, well-lit workspace. Gather the necessary tools, including a SIM card ejector, plastic spudger, small screwdriver, and a heat gun.

Power off and Remove SIM Tray

Power off the Blade A7 and remove the SIM card tray.

Heat and Separate Screen

Heat the edges of the screen with a heat gun at a low setting. After evenly heating, gently pry up the screen using the plastic spudger.

Disconnect Battery

With the screen removed, locate the battery connector and disconnect it using the plastic spudger.

Remove Old Parts

Each smartphone part connected to the motherboard will have a connector. Gently pry these connectors up with the spudger. Remove the old parts you want to replace.

Install New Parts

Connect the new replacement parts to the motherboard. Ensure each connector snaps into place properly.

Reconnect Battery and Reassemble Screen

Reconnect the battery and place the screen back onto the phone. Apply slight pressure to make the screen adhere to the phone body.

Power On and Test

Turn on the phone and test the replacement parts to ensure they're working properly.

Note: Always take care while disassembling and reassembling your device. If you're uncertain or uncomfortable with any step, consider professional help.