ZTE Blade A7 spare parts

ZTE Blade A7 Repuestos - Technical Characteristics

The ZTE Blade A7 smartphone parts consist of various high-quality and efficiently designed components. These components not only provide great performance but also ensure the device's longevity.

• Display: 6.09-inch HD+ Screen, 720x1560 pixels resolution
• Processor: Mediatek MT6762 Helio P22 (12 nm)
• Memory: 2/3/4GB RAM with 32/64GB Internal Storage
• Battery: Non-removable Li-Ion 3200 mAh battery
• Main Camera: 16 MP, PDAF
• Selfie Camera: 5 MP

Instructions for Replacing ZTE Blade A7 Repuestos

Following are the detailed instructions for replacing the ZTE Blade A7 repuestos. Please adhere to these instructions carefully to prevent damage to other components of the phone.

Tools Needed

• Screwdriver
• Tweezers
• Spudger
• Prying tool

Steps for Replacement

1. Turn off the device: Always make sure your device is turned off before you begin.
2. Remove Sim Tray: Start by removing the sim tray using the sim card ejector tool.
3. Remove the back cover: Gently heat the device's rear cover edge and use a spudger or prying tool to lift the back cover carefully.
4. Unscrew and Remove the protective plate: After the back cover is removed, you will see twelve screws. Unscrew them using your screwdriver and remove the protective plate covering the motherboard.
5. Unhook the Battery: Use the spudger tool to disconnect the battery connector from the motherboard.
6. Remove the battery: After unhooking the battery, you can now carefully remove it using the tweezers.
7. Replace with the new battery: Now, place the new battery in its place and connect it to the motherboard.
8. Reassemble the phone: Put the protective plate back and screw it with the twelve screws, attach the back cover, and insert the sim tray back.

Please be aware that by doing this, you might lose the warranty on your device, so proceed with caution.