Zte Blade V40 Design spare parts

Zte Blade V40 Design Repuestos Technical Specifications

The technical characteristics of the Zte Blade V40 Design include:

• Screen: 6.82" IPS, HD+ Resolution
• CPU: UNISOC T618, Octa Core
• RAM: 4/6 GB
• Storage: 64/128 GB (expandable via MicroSD)
• Camera: Rear Camera - 64MP+8MP+2MP / Front Camera - 8MP
• Battery: 5000mAh

Instructions for Replacing Zte Blade V40 Design Repuestos

Please follow the steps below:

Step 1: Tool acquisition

You will need a screwdriver, a plastic opening tool, and a heating tool/device for the disassembly process.

Step 2: Turn off the device

Ensure that the device is turned off before proceeding with the replacement process in order to avoid any potential damage.

Step 3: Heat the edges of the display

Use the heating tool/device to soften the adhesive that holds the display in place.

Step 4: Use the plastic opening tool

Insert the plastic opening tool between the display and the main body of the phone. Work it around the edges and gently pry open the device.

Step 5: Remove the display

Gently lift the display away from the main body of the device. Be careful as it is still connected to the motherboard by several cables.

Step 6: Disconnect the display cables

Locate and disconnect the cables that link the display to the motherboard. Be gentle to avoid damaging these cables.

Step 7: Replace the part

Replace the needed part with the new replacement part.

Step 8: Reassembly

Reconnect any disconnected cables, reattach the display and gently press it into place. Turn on the device, once you have made sure that it has been assembled correctly.

Note: Follow all steps very carefully and at your own risk. If you feel uncomfortable with the process, take your device to a professional service.