ZTE Blade V40 Pro spare parts

ZTE Blade V40 Pro Repuestos - Technical Characteristics

The ZTE Blade V40 Pro is a well-designed smartphone equipped with impressive components. This section will detail the key parts or "repuestos" of the ZTE Blade V40 Pro.

Display Screen

The ZTE Blade V40 Pro features a vibrant 6.7-inch IPS LCD screen with a resolution of 1080 x 2400 pixels. It also supports multi-touch inputs.

Camera

The phone has an impressive quad-camera system on the back: a 64MP main camera, an 8MP ultra-wide camera, a 2MP macro camera, and a 2MP depth sensor. The front camera is a 16MP selfie shooter.

Battery

The device is powered by a non-removable Li-Po 5000 mAh battery.

Motherboard

This is the main circuit board of the smartphone, housing several major components such as the processor (MediaTek MT6833 Dimensity 700 5G), memory, and storage capacities.

Other Parts

• Wireless Modules: These facilitate the phone's connectivity features like Wi-Fi, GPS and Bluetooth.
• Charging Port: This is the micro USB port through which the phone's battery is charged.
• Audio Jack: This is the standard 3.5mm jack for plugging in headphones or external speakers.

Replacing ZTE Blade V40 Pro Repuestos - Instructions

Always ensure you power off the device before starting any replacement process to avoid electrical shorts or possible data loss. Use anti-static instruments to handle sensitive components. We will illustrate steps mainly for the screen and battery as examples.

Battery Replacement

Ensure you have a replacement battery specific to the Blade V40 Pro model.

• Step 1: Loosen the adhesive on the back cover with a heating tool.
• Step 2: Use a pick to gradually lift the back cover from the edges.
• Step 3: Disconnect the battery cable from the motherboard.
• Step 4: Remove the old battery and place the new one. Ensure it aligns correctly with the terminals.
• Step 5: Reconnect the battery connector and reassemble the phone.

Screen Replacement

The replacement screen should be specifically for the Blade V40 Pro model. Avoid touch during the process as the oils from your fingers can cause permanent damage.

• Step 1: Heat up the edges of the screen to soften the adhesive.
• Step 2: Use a pick or suction tool to remove the old screen.
• Step 3: Clean the phone of any residue adhesive or glass fragments.
• Step 4: Carefully align the new screen over the phone.
• Step 5: Firmly but gently press the screen into place.