ZTE Blade V7 Lite spare parts

ZTE Blade V7 Lite Repuestos Technical Specifications

The ZTE Blade V7 Lite repuestos is a set designed to restore your mobile phone performance with parts that are designed to fit perfectly, showing the exact quality as the original components of the phone. The following are the major components:

• Display Screen: LCD capacitive touch screen, 16M colors, 720 x 1280 pixels.
• Battery: Non-removable Li-Ion 2500 mAh.
• Camera: Front 8MP, rear 13MP.

Instructions on replacing ZTE Blade V7 Lite Repuestos

Screen Replacement

Switch off your ZTE Blade V7 Lite phone before starting the disassembly process.

• Remove the screws: Use a screwdriver to remove the screws at the bottom.
• Separate the back cover: With the help of a plastic opening tool, pry up the back cover.
• Remove the battery connector: Disconnect the battery connector from the motherboard.
• Replace the screen: Now you can remove the broken screen and replace it with the new one. Make sure the new screen is correctly positioned.
• Reassembly: Reattach the battery connector to the motherboard and close the back cover. Secure it with the screws removed earlier.

Battery Replacement

Make sure the device is powered off before starting.

• Remove back cover: After removing the screws at the bottom of the phone, use a plastic opening tool to pry up the back cover.
• Disconnect the battery: Carefully disconnect the battery connector from the motherboard.
• Replace the battery: Carefully replace the original battery with a new one, ensuring correct alignment, and then reconnect it to the motherboard.
• Reassemble: Put the back cover back on and secure it with the previously removed screws.

For all procedures, handle parts with care to avoid damaging any connectors. If the problem persists after replacement, professional assistance may be required.