ZTE Blade V8 Pro

ZTE Blade V8 Pro Technical Characteristics

The ZTE Blade V8 Pro is an enticing smartphone with impressive features. Here's a detailed look at its technical characteristics:

• Operating System: Android 6.0.1 (Marshmallow)
• Processor: Qualcomm Snapdragon 625
• Display: 5.5-inch IPS LCD
• Resolution: 1080 x 1920 pixels
• Ram: 3GB
• Storage: 32GB (expandable up to 128GB)
• Cameras: Dual 13MP rear cameras, 8MP front camera
• Battery: 3140mAh

Replacing ZTE Blade V8 Pro

Replacing parts of your ZTE Blade V8 Pro can take patience and precision. Here is a detailed guide:

Tools Needed

• Small Phillips screwdriver
• Spudger tool
• Suction cup tool
• Tweezers

Instructions

Step 1: Power off your ZTE Blade V8 Pro.

Step 2: Use the small Phillips screwdriver to remove all screws from the bottom and top of the phone.

Step 3: Insert a spudger tool in the gap between the screen and the frame to pry the screen up gently.

Step 4: When there is enough gap, place a suction cup on the screen. Then, press down on the edges of the suction cup and pull up gently to separate the screen from the frame completely.

Step 5: Use a spudger to disconnect the battery connector safely.

Step 6: With the tweezers, carefully remove the battery.

Step 7: To install a new battery, place it into the phone carefully, connect the battery connector, reattach the screen, replace the screws and turn the phone back on.

Please remember to be careful while handling the delicate parts of your phone. If you're not confident in your ability to follow these steps, consider taking your phone to a professional for repair.