ZTE Blade V8

ZTE Blade V8 Technical Specifications

The ZTE Blade V8 is a notable smartphone from ZTE Corporation offering robust features and specifications. Here are the detailed technical characteristics:

• Display: Full HD 5.2 inches, 1920 x 1080 pixels resolution.
• Processor: Qualcomm Snapdragon 435.
• Memory: 3GB RAM with 32GB internal storage.
• Camera: Dual 13+2 MP rear, 13 MP front.
• Battery: 2730mAh non-removable.
• Operating System: Android 7.0 (Nougat).

ZTE Blade V8 Replacement Guide

Replacing components of the ZTE Blade V8 requires technical prowess. Before proceeding, it's essential to have the right tools ready for the job. The process involves opening the device, replacing a component, and reassembling.

Tools Required

• Small Phillips screwdriver
• Plastic openings tool
• Tweezers

Removal Process

Here are step-by-step instructions on the replacement:

• Step 1: Power off the device to avoid any potential short circuit.
• Step 2: Using the plastic opening tool, carefully pry open the back cover from the small opening slot at the bottom of the phone.
• Step 3: Remove the Phillips screws that secure the metal shielding.
• Step 4: Carefully lift the metal shielding and disconnect the battery connector using the tweezers.

Replacement Process

After completing the previous steps, continue with the following:

• Step 5: Now, start the replacement process. If it's a battery replacement, connect the new battery to the connector and place it in the proper slot.
• Step 6: For other parts, carefully disconnect the damaged part from its connector, connect the replacement part, and position it appropriately.
• Step 7: Replace the metal shielding and install the Phillips screws.
• Step 8: Finally, firmly secure the back cover on the phone, ensuring that all clips latch properly.

Note

All replacement procedures should be approached with caution. If you are not confident, seek help from a professional to avoid causing further damage to your device.