ZTE Grand X max z787 z987 spare parts

    There are 2 products.

    ZTE Grand X max z787 z987 Technical Specifications

    The ZTE Grand X Max Z787 Z987 is a versatile smartphone featuring high-quality components. Before executing a replacement or repair, it’s important to understand some of its key specifications:

    • Display: 6.0 inches, 720 x 1280 pixels, Corning Gorilla Glass 3
    • Processor: Quad-core 1.2 GHz, Snapdr...

    ZTE Grand X max z787 z987 Technical Specifications

    The ZTE Grand X Max Z787 Z987 is a versatile smartphone featuring high-quality components. Before executing a replacement or repair, it’s important to understand some of its key specifications:

    • Display: 6.0 inches, 720 x 1280 pixels, Corning Gorilla Glass 3
    • Processor: Quad-core 1.2 GHz, Snapdragon 400 chipset
    • Memory: 2 GB RAM, 16 GB internal storage (expandable)
    • Battery: Non-removable Li-Ion 3200 mAh battery
    • Camera: 13 MP rear camera, 5 MP front camera

    Replacement Instructions for ZTE Grand X max z787 z987

    Before starting the replacement process, ensure you have the correct replacement parts, and that you are working in a clean, well-lit area. Tools needed for this procedure include a small Phillips-head screwdriver, and a plastic opening tool.

    Step 1: Power Off the Device

    Shut down your ZTE Grand X Max to prevent any possible short circuits during the replacement process.

    Step 2: Remove Back Cover

    Insert the plastic opening tool into the seam between the back cover and the frame to gently pry it off. Be careful not to apply too much force to prevent damaging the device.

    Step 3: Remove Battery

    Unscrew the screws holding the battery in place and carefully lift the battery out of the phone.

    Step 4: Replace Needed Component

    At this stage, depending on the replacement part, further disassembly may be required. Gently unscrew and remove the appropriate parts, replacing them with your new components as necessary.

    Step 5: Reassembly

    Once the part is replaced, follow the disassembly steps in reverse order to reassemble your device. Make sure to securely fasten the screws and ensure that each cover or part snaps back correctly in place.

    Step 6: Power On the Device

    Finally, turn on your device. If it powers up properly and everything operates as expected, the part replacement process has been successful.

    Remember: performing repairs on your own may void the warranty of your device. If your device is still under warranty, consider taking it to an official service center.

    Less
    More
    Showing 1 - 2 of 2 items