ZTE Nubia M2 NX551J spare parts

    There are 10 products.

    ZTE NUBIA M2 NX551J Repuestos Technical Characteristics

    The ZTE NUBIA M2 NX551J is a Dual SIM smartphone launched by the Chinese manufacturer, ZTE Corp. The following are the technical characteristics of the ZTE NUBIA M2 NX551J Repuestos.

    • Screen: AMOLED 5.5 inches, 1080 x 1920 pixels
    • Memory: RAM-4GB | ROM 64GB, Expandable up to 200GB
    • Ca...

    ZTE NUBIA M2 NX551J Repuestos Technical Characteristics

    The ZTE NUBIA M2 NX551J is a Dual SIM smartphone launched by the Chinese manufacturer, ZTE Corp. The following are the technical characteristics of the ZTE NUBIA M2 NX551J Repuestos.

    • Screen: AMOLED 5.5 inches, 1080 x 1920 pixels
    • Memory: RAM-4GB | ROM 64GB, Expandable up to 200GB
    • Camera: Rear 13MP+13MP, Front- 16MP
    • Battery: Li-Ion 3630mAh non-removable battery
    • CPU: Qualcomm MSM8953 Snapdragon 625 Octa-core 2.0 GHz Cortex-A53

    Replacing ZTE NUBIA M2 NX551J Repuestos

    Please carefully follow the below instructions to replace the ZTE NUBIA M2 NX551J Repuestos:

    Disassembly

    • Switch off the device: Before starting with the disassembly process, make sure the device is off.
    • Remove the SIM tray: This can be done using the SIM card removal tool.
    • Heat the edges of the back cover: A heat gun or hairdryer can be used to loosen the adhesive on the edges of the back cover.
    • Open the back cover: Use a plastic pry tool to gently lift the back cover starting from the charging port side.

    Replacing Repuestos

    • Remove the old parts: Use the appropriate screwdriver to unscrew and remove the defective parts.
    • Insert the new parts: Place the new repuesto in the correct position, securing it with the screws.

    Reassembly

    • Attach the back cover: Make sure all repuestos are secure before re-attaching the back cover. Apply pressure to the edges to reseal the adhesive.
    • Insert the SIM Tray: The SIM tray should be the last part to be put back into place.
    • Switch on the device: After completing the replacement process, switch on the device to confirm that everything works perfectly. Adjust any repuesto if necessary.
    Less
    More
    Showing 1 - 10 of 10 items