ZTE Nubia N2 spare parts

    There are 8 products.

    ZTE Nubia N2 Repuestos

    The ZTE Nubia N2 is an Android smartphone designed and manufactured by ZTE. It is a mid-range device with high-end performance and features.

    Technical Specifications

    • Display: 5.5-inch AMOLED HD display
    • Processor: MediaTek MT6750 processor
    • RAM: 4GB
    • Internal Storage: 64GB, expandable up to 128GB
    • Battery: 5000mAh
    • Rear Cam...

    ZTE Nubia N2 Repuestos

    The ZTE Nubia N2 is an Android smartphone designed and manufactured by ZTE. It is a mid-range device with high-end performance and features.

    Technical Specifications

    • Display: 5.5-inch AMOLED HD display
    • Processor: MediaTek MT6750 processor
    • RAM: 4GB
    • Internal Storage: 64GB, expandable up to 128GB
    • Battery: 5000mAh
    • Rear Camera: 13MP
    • Front Camera: 16MP
    • Operating System: Nubia UI 4.0 based on Android 6.0 Marshmallow

    Instructions On How To Replace ZTE Nubia N2 Repuestos

    Before you begin, ensure that you have all the necessary tools and replacement parts. The process involves opening up the smartphone, disconnecting and removing the defective part, and then replacing it with a new one. Always make sure you turn off your device and properly ground yourself before beginning any repair work.

    Tools Required

    • Screwdriver set
    • Plastic opening tools
    • Precision tweezers

    Steps to Replace Nubia N2 Parts

    Follow the steps below closely to successfully replace the faulty repuestos in your ZTE Nubia N2.

    Step 1: Remove the Rear Cover

    Using a plastic opening tool, gently pry the rear cover off of the device. Be careful not to apply too much pressure to avoid breaking the cover.

    Step 2: Remove the Battery

    Disconnect the battery connector from the motherboard using the precision tweezers. Then, gently lift the battery out of the phone.

    Step 3: Remove Faulty Part

    After exposing the internals, locate the faulty component. Unscrew it, remove the connector and gently take the part out.

    Step 4: Install the New Part

    Place the new part in the correct spot, reconnect the connector, and then screw it back into place.

    Step 5: Reassemble Phone

    Put the battery back, ensuring that the connectors are aligned and secure. Then press the back cover back onto the phone until it clicks into place.

    Remember to keep track of all screws and tools throughout the process, and take your time to ensure that everything is done correctly. If you find this process too difficult, consider seeking a professional's help!

    Less
    More
    Showing 1 - 8 of 8 items