ZTE Nubia Red Magic 7 Pro spare parts

ZTE Nubia Red Magic 7 Pro Technical Specifications

Before you proceed with any repair, it's fundamental to understand the technical specifications and hardware components of the ZTE Nubia Red Magic 7 Pro smartphone.

• Display: 6.8-inch (1080x2400 pixels) AMOLED display.
• Processor: Qualcomm Snapdragon 888+
• RAM: Up to 12GB
• Storage: Up to 256GB
• Battery Capacity: 5050mAh
• Rear Camera: 64MP Main + 8MP Ultra-Wide + 2MP Macro
• Front Camera: 16MP

Guidelines on How to Replace ZTE Nubia Red Magic 7 Pro Repuestos

Here's a detailed guide on how to replace parts in your ZTE Nubia Red Magic 7 Pro:

Preparation

Please note that replacement of smartphone parts requires proficiency with repairing small electronics. It is recommended to consult with a professional if not confident.

Tools Needed:

• Screwdriver
• Plastic spudger
• Tweezers
• Opening tool
• Hot air gun or hair dryer

Step 1: Turning off the phone

Always remember to power off your phone before initiating any repair.

Step 2: Removing the back cover

Heat the back cover with a hot air gun to loosen the adhesive. Use a plastic opening tool to gently pry and remove the back cover.

Step 3: Unfastening the Screws

With the help of a screwdriver, remove all the screws that secure the protective plate in order to expose the motherboard.

Step 4: Disconnecting and Replacing the Part

Firstly, identify the broken part you want to replace. Carefully disconnect it from the main board by unplugging any cables. Replace the part with a new one and reconnect it to the motherboard.

Step 5: Reassembly

Reattach the protective cover over the motherboard and fasten with the screws. Lastly, attach the back cover. Make sure to align it correctly before gently pressing it into place.

Step 6: Testing

Turn the phone on and verify that everything works correctly.

Note: While this guide might help, it is always recommended to approach a professional for any hardware repairs.