ZTE Nubia Red Magic 7 spare parts

ZTE Nubia Red Magic 7 Technical Characteristics

The ZTE Nubia Red Magic 7 phone is a high-quality gaming smartphone that boasts impressive features. Here are the technical characteristics of this device:

• Processor: Snapdragon 8 Gen1, Octa-core
• Display: 6.8 inches, AMOLED, 1080 x 2400 pixels
• Battery: Li-Po 5500 mAh, non-removable
• Memory: 256GB 12GB RAM, 512GB 18GB RAM
• Camera: 64 MP, f/1.8, 26mm (wide), 1/1.72", 0.8µm, PDAF

Instructions for ZTE Nubia Red Magic 7 Repuestos Replacement

Please follow these detailed instructions carefully, to ensure the proper replacement of crucial parts:

Disclaimer

Proceed with caution. This guide should only be followed by experienced individuals. Attempting a repair on your own may void warranties, and you could damage your device if not done correctly.

Tools Required

• Small Phillips Screwdriver
• Plastic Opening Tools
• Tweezers
• Spudger
• Hot Air Gun (Optional)

Step-by-Step Guide

Step 1: Battery Replacement

Start by powering off the device. Use the plastic opening tool to separate the back case from the device. Unscrew all the screws using the small Phillips screwdriver, and gently lift the battery connector using tweezers. Replace the battery and reassemble the device.

Step 2: Screen Replacement

If you're replacing the screen, heat the edges of the screen using a hot air gun to loosen adhesive. Apply gentle, even pressure to lift the screen. Apply new adhesive, set the replacement screen, and reassemble.

Step 3: Camera Replacement

Remove the back cover as before. Disconnect the camera connector using tweezers and gently lift the camera from the socket. Set the replacement camera in place, connect it, and reassemble your phone.

Remember to test all functions on the device after replacement to ensure all parts are working properly.

Final Reminder

Remember to follow all these steps closely for a successful component replacement. If you're unsure about any step, consult a professional.