ZTE Nubia Z17 Lite NX591J spare parts

ZTE Nubia Z17 Lite NX591J Technical Specifications

The ZTE Nubia Z17 Lite NX591J is a durable and reliable mobile device with a range of impressive features. Here are some of the key technical specifications of this device:

• Display: 5.5 inch, Full HD 1080 x 1920 pixels
• Processor: Octa-core (4x2.0 GHz Cortex-A73 & 4x2.0 GHz Cortex-A53)
• RAM: 6GB
• Storage: 64GB
• Camera: Dual 13 MP
• Battery: 3200 mAh
• OS: Android 7.1 (Nougat)

Replacing ZTE Nubia Z17 Lite NX591J Repuestos

Replacing parts on your ZTE Nubia Z17 Lite NX591J can be a simpler process if you follow these instructions. Please note that these procedures should only be done with utmost care. You need specific tools like a small Phillips screwdriver, plastic opening tools, and of course, your replacement part or 'repuestos.'

General Disassembly

Before replacing any components, the standard procedure is to disassemble the phone. Here's how to do it:

• Switch off the device before starting your repair.
• Remove the SIM tray located on the side of the phone using a SIM eject tool.
• Using a heating tool, gently heat the edges of the back cover to soften the adhesive underneath and use a plastic opening tool to pry it open.
• Once the back cover is removed, unscrew all the visible screws using a Phillips screwdriver.

Replacing Specific Components

The disassembly process will give you access to the internal parts of the phone. At this point, the replacement procedure will vary depending on the component being replaced. Here are some standard component replacement procedures. Always remember to keep the screws organized, since they are of different sizes and types.

Battery

• Locate the battery and gently disconnect the battery connector from the motherboard.
• Use a plastic tool to carefully lift the battery. Avoid folding or deforming the battery during removal. Replace with the new battery and reconnect the connector.

Screen Assembly

• The screen is usually glued, so you'll need to apply heat to the edges of the phone to loosen the adhesive.
• Once the adhesive is softened, use a plastic opening tool to gently pry up the screen assembly. Be cautious not to tear any connected cables.
• Upon successfully lifting the screen, disconnect any connectors and replace the screen. Ensure that all connections are secure when installing the new screen.

Please handle your device with care during the replacement process to avoid causing further damage.