ZTE Nubia Z7 Mini NX507J spare parts

ZTE Nubia Z7 Mini NX507J Technical Specifications

The ZTE Nubia Z7 Mini NX507J is a smartphone equipped with impressive specifications, making it a competitive model in today's market. Below are the detailed technical characteristics of this phone:

• Network: GSM / CDMA / HSPA / LTE
• Display: 5.0 inches, IPS LCD, 1080 x 1920 pixels, 16:9 ratio (~441 ppi density)
• OS: Android 4.4.2 (KitKat), upgradable to 5.0.2 (Lollipop)
• CPU: Quad-core (2x2.0 GHz Krait 400 & 2x1.2 GHz Krait 400)
• Memory: Internal 16GB 2GB RAM
• Camera: 13 MP rear and 5 MP front
• Battery: Li-Ion 2300 mAh, non-removable
• Connectivity: Wi-Fi, Bluetooth, GPS, NFC, and microUSB 2.0

How to Replace ZTE Nubia Z7 Mini NX507J Parts

Note: Repairing or replacing parts of your device may void your warranty. Proceed with the following steps at your own risk. Also, ensure that the phone is powered off and unplugged before proceeding.

1. Removing the back cover

• Start by removing the SIM card tray.
• Use a plastic opening tool to gently pry the back cover starting from the bottom edge. Continue this around the entire phone.

2. Disconnecting the battery

• Remove the screws securing the battery connector cover with a Phillips screwdriver.
• Gently lift up and remove the connector cover.
• Use a plastic hand tool to disconnect the battery connector from the motherboard.

3. Replacing the part

• Depending on the part you need to replace, you may need to remove additional screws or connectors. Refer to a specific guide for the part you need to replace.
• Replace the faulty part with a new one, making sure it is secured correctly.

4. Assembly

• Reconnect the battery connector and apply the connector cover. Tighten all screws.
• Carefully align the back cover with the phone and press it into place.
• Insert the SIM card tray back into its slot.

Note: Be gentle to all parts during disassembly and reassembly to avoid additional damage.