ZTE Red Magic 6 Pro spare parts

ZTE Red Magic 6 Pro Technical Characteristics

The ZTE Red Magic 6 Pro is a high-performing gaming smartphone with remarkable features. Here are some key technical details:

• Display: 6.8 inch AMOLED, 1B colors, 165Hz, HDR10+, 630 nits
• Resolution: 1080 x 2400 pixels
• Operating System: Android 11, Redmagic 4.0
• Processor: Qualcomm SM8350 Snapdragon 888 5G (5 nm)
• Storage: 128GB 12GB RAM, 256GB 16GB RAM, 512GB 18GB RAM, UFS 3.1
• Battery: Li-Po 5050 mAh, non-removable, fast charging 66W, 100% in 38 min
• Main Camera: Triple, 64 MP wide, 8 MP ultrawide, 2 MP macro
• Front Camera: Single - 8 MP, wide

Replacement of ZTE Red Magic 6 Pro repuestos (parts)

Please note that this is a basic guide, and you should have some background in smartphone repair before attempting this replacement. Always remember to power off your smartphone before beginning any repair work.

Tools needed:

• Screwdriver
• Plastic opening tools
• Tweezers

Replacement Instructions:

1. Power off your ZTE Red Magic 6 Pro.

2. Remove the SIM Card Tray.

3. Apply a heated iOpener to the edges of the back cover to soften the adhesive underneath. Use a plastic opening tool to pry the back cover from the phone body. Be careful not to damage any internal parts.

4. Remove the screws holding the shield plate in place using the Screwdriver.

5. Remove the shield plate to reveal the internal parts of the phone.

6. Carefully disconnect the battery connector from the motherboard. This is to ensure no current is flowing through the device while working on it.

7. Follow these steps in reverse order to install the new replacement parts. When reassembling your phone, the display adhesive needs to be replaced to ensure the watertight seal. If you have any remaining parts or screws, backtrack and figure out where they belong.

Please note, that this is a basic guideline for experienced repair personnel. Always refer to professional guides or service if you're unsure.