ZTE Red Magic 6 spare parts

ZTE Red Magic 6 Repuestos Specification

The ZTE Red Magic 6 Repuestos comes with an array of impressive components to enhance your smartphone experience.

• Screen: AMOLED, 1080 x 2400 pixels, 6.8 inches
• Processor: Qualcomm SM8350 Snapdragon 888 5G
• Camera: Triple - 64 MP+8 MP+2 MP
• Battery: Non-removable Li-Po 5050 mAh battery
• Operating System: Android 11, Redmagic 4.0

Instructions to Replace ZTE Red Magic 6 Repuestos

Tools Needed

You will need a precision screwdriver, plastic opening tools, tweezers, and a heat gun for some parts.

Replacing the Screen

• Step 1: Power off the device.
• Step 2: Use the heat gun to warm the edges of the screen to loosen the adhesive.
• Step 3: Use the plastic opening tool to gently lift the screen from one corner.
• Step 4: Remove the screws holding the screen connector using a precision screwdriver.
• Step 5: Reconnect the new screen replacement and secure with screws, ensure it is firmly positioned with no gaps.

Replacing the Battery

• Step 1: Power off the device.
• Step 2: Remove the screws from the back cover, then lift it off using a plastic opening tool.
• Step 3: Use the tweezers to disconnect the battery connector from the motherboard.
• Step 4: Remove the screws holding the battery in place, then gently lift out the battery.
• Step 5: Place the new battery and replace the screws, connect the battery connector to the motherboard.
• Step 6: Reattach the back cover and replace the screws.

Please note that any DIY repairs will void your warranty and can potentially cause additional damage to the device. If unsure, please seek professional assistance.