ZTE Red Magic 8 Pro spare parst

Technical Characteristics of ZTE Red Magic 8 Pro Repuestos

ZTE Red Magic 8 Pro is a unique smartphone that offers a variety of features and specifications. Its technical characteristics include:

• Screen: 6.65 inch AMOLED, 1080 x 2340 pixels, 19.5:9 ratio (~388 ppi density).
• Processor: Qualcomm SM8250 Snapdragon 865 (7 nm+).
• Camera: Dual-camera setup on the back (64 megapixels main + 8 megapixels wide-angle), and 8 megapixels camera on the front.
• Battery: Non-removable Li-Po 5000 mAh battery.
• Memory: 128GB or 256GB internal storage and 12GB or 16GB RAM with no slot for external micro SD.
• Operating System: Android 10, Redmagic 3.0

Instructions for Replacing ZTE Red Magic 8 Pro Repuestos

Tools Needed

• Screwdriver
• Spudger
• Tweezers
• Opening tool

Steps To Follow

Step 1: Removing the SIM Tray and Back Panel

• Switch off the device before starting.
• Use a SIM card remover to remove the SIM card tray.
• With the opening tool carefully detach the back cover from the rest of the device.

Step 2: Disconnecting the Battery

• Remove the screw securing the battery connector with a screwdriver.
• Use a spudger to disconnect the battery connector from the motherboard.

Step 3: Removing the Old Repuesto

• Use a screwdriver to remove the screws securing the repuesto you want to replace.
• Detach the connector of the repuesto using a spudger if needed.
• Remove the old repuesto from the device.

Step 4: Installing the New Repuesto

• Place the new repuesto in its designated place.
• Connect it to the motherboard.
• Secure it with the screws.

Step 5: Reassembling the Device

• Reconnect the battery connector and secure it with the screw.
• Replace the back cover and press it into place.
• Reinsert the SIM card tray.

Make sure you follow each step carefully and use the correct tools to prevent damage to your device.