ZTE T50 Blade Vec 4G spare parts

ZTE T50 Blade Vec 4G Technical Characteristics

The ZTE T50 Blade Vec 4G is equipped with several defining features that set it apart. It's an admirable phone with a robust set of specs.

• Operating System: It runs on Android 4.4 KitKat
• Processor: Quad-core 1.2 GHz
• Display: 5.0 inch, TFT capacitive touchscreen
• Resolution: 720 x 1280 pixels
• Camera: 13 Megapixels main camera and 2 Megapixels front camera
• RAM: 1GB
• Storage: 16GB internal storage, expandable using a microSD card
• Battery: Non-removable Li-Io 2300 mAh battery
• Connectivity: Wi-Fi, Bluetooth 4.0, GPS, etc

How to Replace ZTE T50 Blade Vec 4G Repuestos

Tools Needed

You will need a Phillips #00 screwdriver, a plastic opening tool, and a new repuesto for the ZTE T50 Blade Vec 4G.

Step 1: Remove the Back Cover

Use the plastic opening tool to gently pry off the back cover starting from the bottom edge and working your way around.

Step 2: Remove the Battery

Lift the battery up and away from the phone to remove it.

Step 3: Unscrew the Screws

Using the Phillips #00 screwdriver, unscrew the thirteen screws located around the phone.

Step 4: Remove the Frame

Using the plastic opening tool again, gently lift the plastic frame away from the screen assembly.

Step 5: Replace the ZTE T50 Blade Vec 4G Repuesto

At this point, you should have access to the Repuesto. Carefully remove the old one and replace it with the new one. Be careful not to damage any other components in the process.

Step 6: Reassemble the Phone

After you have finished replacing the Repuesto, follow the steps backwards to reassemble your ZTE T50 Blade Vec 4G. Be sure to securely fasten all screws and snap the back cover into place.

Please remember: If at any point you feel uncomfortable performing these steps on your own, seek professional help.