Rear camera flex by Google Pixel 8 premium quality

Rear Camera Flex for Google Pixel 8 – Premium Quality

This part corresponds to the 50 MP main rear camera module for the Google Pixel 8, including the image sensor and the FPC flex cable for motherboard connection. Built in premium quality, it is intended for replacing the original part in case of physical damage, blurry image, autofocus failure, or detection loss by the system.

Technical Specifications

• Resolution: 50 megapixels

• Sensor: Samsung GN2

• Aperture: f/1.68

• Optical Image Stabilization (OIS): Yes

• Autofocus: Octa PD (8-point phase detection)

• Connector: FPC flex

• Position: Rear main camera module

• Compatible models: Google Pixel 8

• Technical codes: G9BQD, GZPFO, GA04834-GB

Compatibility Warning

Google Pixel 8 includes the advanced Titan M2 security chip, which cryptographically pairs hardware like cameras to the system firmware. As a result:

• If the module is not properly paired, the system may not detect or activate it, even after correct installation.

• The camera app may show no image and no error.

• This replacement does not bypass pairing restrictions, and is recommended only when the original part is physically damaged but still recognized by the device.

Installation Tips

• Disconnect the battery before starting.

• Avoid bending the flex or applying pressure on the sensor.

• Use proper tools and an antistatic workspace.

• Always test the component before final assembly.

Technical Table