Amazfit GTR 42mm spare parts

Technical Characteristics of Amazfit GTR 42mm Repuestos

The Amazfit GTR 42mm repuestos is a collection of replacement parts for the 42mm Amazfit GTR smartwatch. These replacement parts are designed to ensure that your device functions optimally, even after a repair or parts replacement.

Parts of Amazfit GTR 42mm Repuestos

• Display: 1.2" AMOLED, resolution 390x390, 326ppi, always-on display
• Battery: 195mAh LiPo, up to 12 days normal use
• Band: Quick-release, genuine leather and silicone, 20mm width
• Charging base: Pogo pin 2pin (5.0V-2.0A)

Instructions for Replacing Amazfit GTR 42mm Repuestos

For the integrity of your device, it’s always recommended to have a professional handle replacement of parts. However, for those who are technically inclined, here are the instructions on how to replace the components:

1. Display Replacement

• Step 1: Carefully remove the four screws on the back cover using a screwdriver.
• Step 2: Once loose, gently lift the back cover to expose the components.
• Step 3: Find the display connector and gently unplug it.
• Step 4: Remove the old display component and replace it with the new one.
• Step 5: Plug the display cable back into the connector.
• Step 6: Replace and tighten the screws to secure the back cover.

2. Battery Replacement

• Step 1: Follow the steps 1 and 2 from Display Replacement.
• Step 2: Locate the battery connector and gently unplug it.
• Step 3: Carefully extract the old battery.
• Step 4:Place the new battery in the battery slot.
• Step 5: Plug in the battery connector.
• Step 6: Replace and tighten the screws on the back cover.

3. Band Replacement

• Step 1: Locate release latch on the back of the watch.
• Step 2: Push the latch to release the watch band.
• Step 3: Position the new band with the latch hole.
• Step 4: Push the latch back into place, securing the new band.

Please remember to handle all components of your Amazfit GTR 42mm repuestos with care to avoid any damage.