Apple Watch 38mm serie 3 spare parts

Apple Watch 38mm Series 3 Technical Characteristics

The Apple Watch 38mm Series 3 is a third-generation smartwatch designed by Apple Inc. It is praised for its powerful capabilities and compact size. Here are the main technical characteristics:

• Display: OLED Retina display with Force Touch and 272 x 340 pixels.
• Processor: Apple S3, a dual-core processor.
• Storage: Available in 8 GB and 16 GB variants.
• Water Resistance: Up to 50 meters under ISO standard 22810:2010.
• Connectivity: Supports Bluetooth 4.2 and Wi-Fi 802.11b/g/n.
• Power: Built-in rechargeable lithium-ion battery with up to 18 hours of battery life.

Instructions for Replacing Apple Watch 38mm Series 3 Spare Parts

Replacing parts of an Apple Watch 38mm Series 3 should be done with extreme care. Please follow the instructions detailed below for the procedure:

Tools Required:

• Tweezers
• Tri-point Y000 screwdriver
• iOpener or professional heat gun for adhesive removal

1. Removing the Display

Heat the edge of the watch’s face to soften the adhesive. Use a suction cup to gently lift the display. Note: Be cautious of the display cables when separating the display from the body.

2. Detaching the display cables

Use the Y000 screwdriver to remove the screws securing the connector plate, thereby enabling you to carefully disconnect the display cables.

3. Replacing the Component

Depending on the part to be replaced, proceed with the corresponding steps. The most common replacements involve the battery and the digital crown.

4. Reassembly

Reattach the display cables to the body then secure the connector plate. Warm up the adhesive on the display and fit it back to the watch body. Ensure everything is secure and test the watch to confirm functionality.

Note: This process can potentially void your warranty, so we highly advise getting professionals to do it if you're not confident in your skills or if the warranty is still valid.