Apple Watch 42mm serie 3 spare parts

    There are 16 products.

    Technical Characteristics of Apple Watch 42mm Serie 3 Repuestos

    The Apple Watch 42mm Serie 3 repuestos (components) offer exquisite features matching the innovative design and functionality of Apple products. Here are their technical characteristics:

    • Screen: OLED Retina display with Force Touch
    • Resolution: 312 x 290 pixels
    • Processor: Du...

    Technical Characteristics of Apple Watch 42mm Serie 3 Repuestos

    The Apple Watch 42mm Serie 3 repuestos (components) offer exquisite features matching the innovative design and functionality of Apple products. Here are their technical characteristics:

    • Screen: OLED Retina display with Force Touch
    • Resolution: 312 x 290 pixels
    • Processor: Dual-core S3 processor
    • Memory: 8GB
    • Operating System: WatchOS
    • Connectivity: 802.11b/g/n 2.4GHz Wi-Fi, Bluetooth 4.2
    • Battery: Lithium-Ion battery, Up to 18 hours of battery life
    • Sensors: Heart rate sensor, accelerometer, and gyroscope
    • Water Resistance: Up to 50 meters

    Instructions on How to Replace Apple Watch 42mm Serie 3 Repuestos

    Performing technical work on a device like an Apple Watch can be tricky. Here's a step-by-step guide on how to replace the Apple Watch 42mm Serie 3 repuestos:

    Tools Needed

    • Tri-point Y000 screwdriver
    • iOpener (or hairdryer)
    • Spudger
    • Plastic opening tools
    • Tweezers

    Procedure

    Before performing any repairs, make sure to power off the Apple Watch and avoid electrostatic interference.

    1. Remove Bands: Start by removing the bands from the watch. Press the band release button and slide out the band.
    2. Heat the Edges: Use an iOpener or hairdryer carefully to heat the edges of the watch face. This helps soften the adhesive holding the display to the case.
    3. Lift Screen: Using a plastic opening tool, gently separate the screen from the case. Be careful not to damage the display cables.
    4. Remove Screws: Using the Y000 screwdriver, remove the two screws connecting the display cables to the watch case.
    5. Remove the Display: With tweezers, gently unplug the display cables and remove the display. Be careful not to pull too hard or you risk damaging these cables.
    6. Replace Components: From this point, you can replace the necessary components, whether it be the battery, Taptic Engine, or another repuesto.

    Make sure to consult a professional if you encounter any difficulties replacing the Apple Watch 42mm Serie 3 repuestos.

    Less
    More
    Showing 1 - 16 of 16 items