Apple Watch Serie 4 44mm spare parts

Technical Characteristics of Apple Watch Serie 4 44mm Repuestos

The Apple Watch Serie 4 44mm component parts, or repuestos, refer to the various elements that make up the watch's hardware. Here are some of its technical characteristics:

• Display: Second-generation OLED Retina display with Force Touch, 368 by 448 pixels resolution.
• Processor: Dual-core S4 processor, Up to 2x faster than S3 processor.
• Storage: 16GB capacity.
• Wireless: Wi-Fi (802.11b/g/n 2.4GHz), Bluetooth 5.0.
• Battery: Up to 18 hours of battery life.

Instructions for Replacing Apple Watch Serie 4 44mm Repuestos

Step 1: Power off Your Watch

Before starting any repair process, it's essential to power off your Apple Watch to prevent short-circuits.

Step 2: Remove the Band

Press the band release button on the back of your Apple Watch, then slide the band across to remove it.

Step 3: Open the Display

Heat the watch’s face to loosen the adhesive holding it down, then use a precision knife to gently lift the display. Be careful not to strain or tear the display cables.

Step 4: Disconnect and Remove the Display

Use a Y000 driver to unscrew the bracket that covers the display cables. After unscrewing, use a plastic opening tool to disconnect the display from the cables and set it aside.

Step 5: Replace the Desired Component

Once the display is disconnected, you have access to the internal components (like battery, taptic engine, etc.). Depending on what "repuesto" needs replacement, locate it and carefully replace it with the new component.

Step 6: Reassembly

Once the part is replaced, re-connect the display. Once secure, re-attach the display to the frame using adhesive, then reattach your band.

Note:

Remember that some internal parts may require specialized tools to remove or replace. Always be gentle when handling the small, delicate parts of the Apple Watch Serie 4 44mm.