Garmin Vivoactive 3 Spare Parts

Garmin Vivoactive 3 Repuestos Technical Characteristics

The Garmin Vivoactive 3 Repuestos is a collection of replacement parts for the Garmin Vivoactive 3 smartwatch. The Vivoactive 3 is a multipurpose wearable device known for its high-end features and robust build quality. The following lists the technical characteristics of the chief replacement components:

• Screen Replacement: It features a 1.2-inch diameter, 240 x 240 pixels, transflective memory-in-pixel (MIP), sunlight-visible touchscreen display.
• Battery Replacement: The battery is a rechargeable lithium-ion battery providing up to 7 days of usage in smartwatch mode and 13 hours in GPS mode.
• Heart Rate Sensor: This is found on the back of the device, featuring Garmin Elevate™ wrist heart rate monitor.
• Charging/Data Cable: Proprietary USB to four-pin connector with cable length of 0.5m.

Instructions for Replacing Garmin Vivoactive 3 Repuestos

Screen Replacement

Follow these steps to replace the screen on your Garmin Vivoactive 3:

• Step 1: Using a pry tool, carefully separate the watch case back and the front bezel.
• Step 2: Disconnect the old screen by gently pulling the cable attached to the motherboard.
• Step 3: Attach the new screen to the motherboard, ensuring a snug fit.
• Step 4: Secure the front bezel and the watch case back together.

Battery Replacement

Here are the steps to replace the battery:

• Step 1: Like in the screen replacement, separate the watch case back from the front bezel.
• Step 2: Detach the battery's connector carefully from the motherboard.
• Step 3: Insert the new battery and attach its connector to the motherboard.
• Step 4: Secure the front bezel and case back together.

Please note: Always handle these delicate components with care to avoid damage. If you are unsure, it is recommended to consult a professional.