Huawei Honor Watch ES spare parts

Huawei Honor Watch ES Repuestos: Technical Characteristics

The Huawei Honor Watch ES repuestos (replacement parts) are specifically designed to seamlessly fit and function with your Huawei Honor Watch ES. The key components and their technical characteristics are as follows:

• Screen Replacement: Featuring an AMOLED touchscreen display panel that supports 456 by 280 pixels resolution.
• Battery: A high-capacity lithium-polymer battery that delivers exceptional durability.
• Charging Port and Cable: Supports fast charging with a vector power input of 5V/1A.
• Watch Bands: High-quality interchangeable straps made from durable silicone or leather.

Instructions for Replacing Huawei Honor Watch ES Repuestos

Screen Replacement

First, ensure you have all the necessary tools – small Phillips screwdriver, pry tool kit, and plastic pick.

• Switch off the Watch and remove the bands.
• Unscrew all the screws around the watch frame to take the back cover off.
• Detach the ribbon cable connecting the screen to the mainboard.
• Remove the old screen and replace it with the new one. Reconnect the ribbon cable, reassemble the back cover and screws, reattach the bands, and the process is complete.

Battery Replacement

The same tools mentioned above for screen replacement will be needed.

• Turn off your Watch and remove the bands and back cover as previously described.
• Detach the connector cable for the battery from the mainboard.
• Slowly lift the battery using a pry tool and replace it with a new one.
• Reconnect the battery connector cable. Then reassemble the back cover, screws and bands accordingly.

Charging Port and Cable Replacement

This process requires a soldering tool in addition to the tools previously mentioned.

• Follow the previous steps to remove the back cover of the Watch.
• Desolder the old charging port connection on the mainboard and solder the new port in place.
• Reassemble the rest of the Watch in reverse order of disassembly.

Watch Bands Replacement

No additional tools are needed for this procedure.

• Slide the pin on the band towards the center of the band to detach it from the Watch frame.
• Attach new bands by sliding them onto the frame until they lock into place.

Always remember to test the functionality of the replaced parts on your Huawei Honor Watch ES before completely reassembling to avoid repeat procedures.