Huawei Honor Watch GS Pro 48mm KAN-B19 spare parts

Huawei Honor Watch GS Pro 48mm KAN-B19 Repuestos Technical Characteristics

The Huawei Honor Watch GS Pro 48mm KAN-B19 is a robustly built smartwatch equipped with numerous innovative attribute. This section presents its key technical characteristics.

• Model: Honor Watch GS Pro 48mm KAN-B19
• Case size: 48mm
• Screen size: 1.39 inches
• Screen type: AMOLED
• Resolution: 454 x 454 pixels
• Processor: Kirin A1
• Memory: 4GB
• Bluetooth version: 5.1
• Battery Capacity: 790mAh

Replacing Huawei Honor Watch GS Pro 48mm KAN-B19 Repuestos

Tools Required

• Watch opening tool
• Small screwdriver set
• Spudger tool

Take Apart the Watch

Firstly, using the watch opening tool, remove the back cover of the watch. Ensure this is done gently so as not to damage the cover.

Remove the Battery

Once the back cover is off, locate the battery. Using the spudger tool, gently lift up the battery connector and separate the battery from the device.

Replace Component

Determine which component needs replacing (e.g., the screen, the battery, or the circuit board). Carefully remove the faulty component using the appropriate tool, and replace it with the new repuesto part. Please refer to the specific manufacturer's instructions that come with the repuesto part, as processes can vary slightly.

Reassemble the Watch

Once the faulty part is replaced with the new repuesto, reassemble the watch in reverse order. First, place the new component into its designated slot, then reattach the battery, and finally, securely fasten the back cover.

Please remember, if at any point you feel uncomfortable performing these steps, it's advised to take the device to a professional for repair.