Lg Watch Sport

Technical Characteristics of LG Watch Sport

The LG Watch Sport is a premium Android Wear smartwatch packed with a plethora of features, designed to provide utmost convenience and functionality to the user. Below are its key technical specifications:

• Operating System: It runs on Android Wear 2.0, compatible with iOS and Android.
• Processor: The device is powered by Qualcomm’s Snapdragon Wear 2100 SoC.
• Memory: It has 768MB of RAM and 4GB of storage.
• Display: It features a 1.38-inch full circle P-OLED display, with 480x480 pixels.
• Battery: It houses a 430mAh battery with wireless charging.
• Connectivity: The watch supports Wi-Fi, Bluetooth, GPS, NFC, and Cellular Connectivity via a built-in SIM card slot.
• Sensors: It includes Heart Rate Monitor, Ambient Light Sensor, Accelerometer, Gyroscope, and Barometer.
• Dimensions: The LG Watch Sport measures 45.4 x 51.21 x 14.2mm.

Instructions on Replacing LG Watch Sport

Replacing your LG Watch Sport involves careful steps to avoid potential damage to the watch. Please follow the steps below:

Step 1: Removal of The Watch Band

Understand that the process starts with the removal of the watch band. Locate the small pins at the junction of the band and the watch face, push them inwards, then pull the band off gently.

Step 2: Unscrewing the Back Case

With the band removed, place your watch face-down on a soft, clean cloth. Use a fine Phillips screwdriver to loosen and remove the four screws holding the back case in place.

Step 3: Removing the Battery

The power source is directly beneath the back case. Carefully lift the battery connector with tweezers, then remove the battery from the pocket.

Step 4: Replacing the Battery

Replace the old battery with a new one, making sure that the battery connectors align correctly. Firmly press the battery into the pocket.

Step 5: Reinstalling the back Case

Place the back case onto the watch and secure it with the four screws. Ensure the case is well-fitted and tight.

Step 6: Reattaching the Watch Band

Finally, attach the watch band back onto the watch face. Make sure it is secure and clicks into place.

Please, ensure to follow these steps only if you understand them well. If not, kindly seek professional assistance.