Samsung Galaxy Gear S3

Samsung Galaxy Gear S3 Specifications

The Samsung Galaxy Gear S3 is a smartwatch that comes with a host of features:

• Display: 1.3 inches, Super AMOLED capacitive touchscreen, 16M colors
• Resolution: 360 x 360 pixels (~278 ppi density)
• OS: Tizen-based wearable platform 4.0
• CPU: Dual-core 1.0 GHz
• Memory: 4GB 768MB RAM
• Battery: Non-removable Li-Ion 380 mAh battery

Replacing Samsung Galaxy Gear S3

Before starting, ensure you have the necessary tools and replacement parts.

Instructions:

Follow the steps below to replace your Samsung Galaxy Gear S3:

1. Step 1: Ensure that the device is turned off.
2. Step 2: Remove the band from the smartwatch by sliding the latch and detaching the band.
3. Step 3: Remove the four screws on the back of the device using a small Phillips screwdriver.
4. Step 4: Carefully lift and remove the back cover.
5. Step 5: Detach the battery by using a spudger to gently lift the connector.
6. Step 6: Replace the old battery with a new one.
7. Step 7: Reconnect the connector for the new battery.
8. Step 8: Replace the back cover and secure back in place with screws.
9. Step 9: Reattach the band to the smartwatch.
10. Step 10: Turn on the device to verify the new battery is working correctly.

Caution:

Make sure to handle all parts of the smartwatch with care to prevent any damage. Always power off your device before starting any repair project. This guide is only for reference and repair should be done by a professional if you are unsure.