Samsung Galaxy Gear

Samsung Galaxy Gear Technical Specifications

The Samsung Galaxy Gear is a smartwatch produced by Samsung Electronics in the Samsung Gear family of devices. Noted for its innovative design where technology meets luxury, this device offers a range of amazing features.

Key Features of Samsung Galaxy Gear:

• Processor: Exynos 4212 Dual-core 800MHz
• Operating System: Tizen-based wearable platform
• Memory: 512 MB RAM
• Storage: 4GB internal storage
• Display: 1.63in Super AMOLED with a resolution of 320 x 320 pixels
• Battery: Non-removable Li-Ion 315mAh battery
• Camera: 1.9MP autofocus camera with 720p video recording

Samsung Galaxy Gear Replacement Guide

Follow these instructions to replace your Samsung Galaxy Gear. These step-by-step instructions will guide you through the process of disassembling and replacing the device.

Before you start:

Warning: This guide will void your warranty. Proceed at your own risk.

Needed Tools: Small Phillips Screwdriver, Pry Tool, Tweezers

Disassembling Samsung Galaxy Gear:

• Turn off the device and unfasten the straps.
• Remove the 4 screws on the back of the watch using the screwdriver.
• Using the pry tool, carefully lift the back cover.

Replacing the Battery:

• Locate the battery connector and gently disconnect it using tweezers.
• Use the pry tool to lift the battery out of the device.
• Place the new battery into the device, and reconnect the battery connector.

Reassembling the Device:

• Replace the back cover and secure it with the 4 screws.
• Reattach the straps to the watch.
• Turn on the device to ensure everything is working properly.

Note:

If the device does not turn on, you may need to recharge the new battery first. If problems persist, double-check all connections inside the device.