Samsung Galaxy Watch 3 45mm spare parts

Samsung Galaxy Watch 3 45mm Specifications

The Samsung Galaxy Watch 3 45mm is a premium smartwatch model with various impressive specs.

• Dimensions: 46.2 x 45.0 x 11.1 mm
• Weight: 53.8g
• Display: 1.4 inches, Super AMOLED, 360 x 360 pixels
• Battery: 340mAh, Qi Wireless Charging
• OS: Tizen OS 5.5
• Storage: 8GB
• RAM: 1GB
• Processor: Exynos 9110
• Sensors: Heart Rate Monitor, Accelerometer, Gyroscope, Barometer
• Connectivity: Bluetooth 5.0, Wi-Fi b/g/n, GPS/GLONASS/Beidou

Steps for Replacing Samsung Galaxy Watch 3 45mm Parts

Please make sure to back up all important data and follow the steps carefully. The process involves handling sensitive parts and requires precise movements.

Tools Needed

• Tweezers
• Screwdriver
• Plastic opening tool
• New replacement part(s)

Step 1: Switch Off the Device

Power off the Samsung Galaxy Watch 3 before beginning the replacement process.

Step 2: Remove the Back Cover

Use the plastic opening tool to gently pry up the edges of the back cover. Be careful not to apply too much force.

Step 3: Disconnect the Battery

Locate the battery connector and use the tweezers to carefully disconnect it.

Step 4: Remove and Replace the Component

Remove the faulty component by loosening the screws (if any) and gently lifting the part with the tweezers. Replace it with the new component, making sure to connect it properly.

Step 5: Reassemble the Watch

Once the component has been replaced, reconnect the battery and reattach the back cover.

Step 6: Power On the Device

Switch on the watch to ensure that the replacement part is working properly. If not, revisit the steps above or seek professional assistance.