Samsung Galaxy Watch Active R500 spare parts

Samsung Galaxy Watch Active R500 Repuestos - Technical Specifications

The Samsung Galaxy Watch Active R500 model is a durable and versatile smartwatch with the following key components that might require replacing:

• 1.44 Inch (3.65 cm) AMOLED Touchscreen Display
• 230 mAh battery
• Corning Gorilla Glass DX+ for screen protection
• Exynos 9110 chipset
• 768 MB RAM and 4 GB internal storage
• Heart Rate Monitor, Accelerometer, Gyroscope, Barometer
• Bluetooth v4.2 and Wi-Fi 802.11, b/g/n

Instructions on Replacing Samsung Galaxy Watch Active R500 Repuestos

Before beginning, please ensure you have clean and organized workspace and the necessary tools, including a soft cloth, tweezers, pry tools, and screwdrivers.

1. Removing the Band

Firstly, remove the band of the watch. Release the pins by sliding the pin brackets in the direction indicated by the arrows.

2. Opening the Back Plate

Cushion the watch face with a soft cloth and turn the watch over to expose the back plate. Use a pry tool to gently remove the back plate.

3. Removing the Battery

Unscrew the screws around the battery compartment and lift the battery using tweezers. Be careful not to pierce the battery.

4. Replacing Components

At this point, you can see the main circuit board that houses the chipset, RAM, and storage. Replace the necessary components with the new parts, ensuring they are securely installed.

5. Re-assembling the Watch

Reverse the procedure to re-assemble the watch. Place the battery back and screw the battery compartment, attach the back plate and slide the bands back into their slots.

Please bear in mind that these instructions are given as general guidance and additional steps may be required depending on the piece being replaced. If you are uncomfortable conducting the repairs yourself, seek professional services.