Samsung Watch 4 Classic 42mm R880 R885 spare parts
There are 14 products.Samsung Watch 4 Classic 42mm R880 R885 Repuestos Technical Characteristics
The Samsung Watch 4 Classic 42mm R880 R885 is a highly sophisticated wearable tech piece. Here, we detail the technical characteristics of its most commonly replaced components:
- Display: 1.2" Super AMOLED, 396 x 396 pixels, Corning Gorilla Glass DX+ protection.
...
Samsung Watch 4 Classic 42mm R880 R885 Repuestos Technical Characteristics
The Samsung Watch 4 Classic 42mm R880 R885 is a highly sophisticated wearable tech piece. Here, we detail the technical characteristics of its most commonly replaced components:
- Display: 1.2" Super AMOLED, 396 x 396 pixels, Corning Gorilla Glass DX+ protection.
- Battery: Non-removable Li-Ion 247 mAh battery, wireless charging.
- Processor: Exynos W920 (5 nm).
- Memory: 16GB internal storage, 1.5GB RAM.
- Sensors: Accelerometer, Gyro, Heart Rate, Barometer, and Bioelectrical Impedance Analysis.
Instructions for Replacing Components
The following are the detailed instructions for the most replaced components of the Samsung Watch 4 Classic 42mm R880 R885, such as the battery or screen:
Replacing the Display
- Step 1: Before you begin, make sure to power off the watch completely to avoid short-circuiting any components during the repair process.
- Step 2: Use a heat gun or a hair dryer to warm up the edges of the display. This loosens the adhesive holding the screen in place.
- Step 3: Carefully pry open the display using a thin, flat plastic tool. Start from one side of the watch and slowly work your way around.
- Step 4: Once the display is loose, disconnect the connector cable that attaches it to the motherboard of the device.
- Step 5: Finally, attach the new screen, ensuring that the connector cable is properly attached to the motherboard. Press the screen back into place, making sure it’s secure. Power on your device to test if the new screen is working correctly.
Replacing the Battery
- Step 1: Power off the device and open the back cover. You may need special tools depending on the screws used.
- Step 2: Once the back cover is removed, locate the battery connector and disconnect it from the motherboard.
- Step 3: Remove the old battery, being careful not to damage any nearby components.
- Step 4: Insert the new battery, connect it to the motherboard, then replace the back cover.
Always be sure to use compatible and high-quality repuestos for your Samsung Watch 4 Classic 42mm R880 R885 in order to maintain the best performance and longevity.
Less More Showing 1 - 14 of 14 items
Disponible 51044 pressure sensor flex by Samsung Galaxy Watch 4 Classic 42mm R880 R885 premium quality
€4.47
Disponible 51087 pressure sensor flex by Samsung Galaxy Watch 4 Classic 42mm R880 R885 premium quality
€3.21
Disponible
Disponible
Disponible 46386 Flex buzzer by Samsung Galaxy Watch 4 40mm R860 R865 premium quality
€5.10
Disponible
Disponible
Disponible
Disponible 53285 Central housing with vibrator flex by Samsung Watch 4 Classic 42mm R880 R885 premium quality
€6.92
Disponible
Disponible
Disponible
Disponible
Disponible 54522 Back housing or back cover black by Samsung Watch 4 Classic 42mm R880 R885
€26.70