Samsung Watch 5 R910 R915 44MM spare parts

Samsung Watch 5 R910 R915 44MM Repuestos Technical Characteristics

The Samsung Watch 5 R910 R915 44MM repuestos parts include the following features:

• Watch Band size: 44mm Standard
• Material: High quality stainless steel
• Color: Assorted
• Includes LCDScreen and Digitizer Assembly
• Back cover and Front Glass
• Battery Replacement: 340mAh capacity

Instructions For Replacing Samsung Watch 5 R910 R915 44MM Repuestos

Below are the detailed steps for replacing the Samsung Watch 5 R910 R915 44MM repuestos:

Tools Needed

• Jeweler's screwdriver set
• Tweezers
• Plastic prying tools

Steps for Replacing the Watch Band

1. First, remove the current watch band by pushing in the small button on the back of the watch.

2. Once the button is pushed, the band should easily slide out. If not, gently pull until it slides out.

3. Position the replacement band with the watch. Make sure the connectors align properly and slide it in until it clicks into place.

Steps for Replacing the LCDScreen and Digitizer Assembly, Back cover, Front Glass

1. Use the Jeweler's screwdriver to remove the screws on the back cover.

2. Next, slide the plastic prying tool around the edge of the back cover to lift it off.

3. Gently disconnect the digitizer and LCD screen connectors using the tweezers.

4. Replace the old screen with the new LCDScreen and Digitizer Assembly. Make sure all connectors are securely in place.

5. Replace the back cover and secure it with the screws.

Steps for Replacing the Battery

1. Repeat the first two steps of replacing the LCDScreen and Digitizer Assembly to expose the battery.

2. Use the tweezers to gently dislodge the battery.

3. Replace it with the new battery ensuring it sits flat and connecting its connector securely.

4. Replace the back cover and secure it with the screws.