Xiaomi Watch S2 spare parts

Xiaomi Watch S2 Technical Characteristics

The Xiaomi Watch S2 is an advanced smartwatch that comes with quite impressive features and excellent technical details. Below is a brief overview of its specifications:

• Screen: AMOLED screen with 454 x 454 pixels resolution.
• CPU: Qualcomm Snapdragon Wear 3100.
• RAM: 1GB.
• Storage: 8GB internal disk.
• Connectivity: Bluetooth 5.0, WiFi, NFC.
• Battery: 420 mAh with up to 36 hours runtime.
• Operating System: Wear OS.

Replacement Instructions for Xiaomi Watch S2 Repuestos (Components)

Tools Needed

• Small Phillips Screwdriver.
• Tweezers.
• Spudger.
• Opening picks.

Steps for Replacement

Note: Always perform this task on a clean, dust-free surface to prevent any damage to the internal parts of the watch.

1. Power Off Device: Remember to turn off your Xiaomi Watch S2 before starting the procedure.
2. Remove Band: Start by removing the watch band. You will see small levers on the back of the watch band. Slide them inwards and pull the band away from the watch case.
3. Remove Back Cover: Use the small Phillips screwdriver to remove the screws securing the back cover. Once screws are removed, gently lift the cover using the spudger tool.
4. Unplug Battery: Use the tweezers to gently unplug the battery connector.
5. Replace Component: Depending on the component you want to replace, locate it, and remove it carefully. Replace it with the new part.
6. Reassemble Device: Once you've replaced the faulty part, follow the above steps in reverse to reassemble your Xiaomi Watch S2.

Safety Measures

It's crucial to perform any replacement process with care to avoid damaging your device or harming yourself. Avoid applying too much force during disassembly and always use the right tools.