Sony Xperia Z Ultra XL39H C6802 C6806 Premium Quality Touchscreen with White Frame

Screen for Sony Xperia Z Ultra XL39H C6802 C6806 with white touch and white frame premium quality

Complete screen with white touch and white frame for Sony Xperia Z Ultra XL39H, C6802 and C6806 in premium quality, designed to replace the front assembly when the device has broken glass, touch failure, image loss, internal stains, lines on the screen or damage to the frame structure. This spare part is supplied with pre assembled frame, which makes assembly easier and allows a cleaner repair on a large format device. The Sony Xperia Z Ultra uses a 6.4 inch TFT screen with 1080 x 1920 pixel resolution and a 179.4 x 92.2 x 6.5 mm body, so it is important to check the technical model before final installation.

Key features

• Complete screen with white touch and white frame.

• Compatible with Sony Xperia Z Ultra XL39H, C6802 and C6806.

• 6.4 inch TFT panel.

• 1080 x 1920 pixel resolution.

• Pre assembled frame to make installation easier.

• Spare part suitable for broken glass, touch failure, lines, stains, image loss or damage to the front frame.

• Premium quality aimed at professional repair.

• Recommended to replace Sony Xperia Z Ultra screen or replace XL39H C6802 C6806 display.

Premium quality is designed for repairs where a spare part with good fit, stable touch response and suitable finish is required for a large size device such as the Xperia Z Ultra. By including white frame, it reduces the work of separating the old panel and improves the result when the original front chassis is marked, bent or damaged. This assembly allows restoring visibility, touch control and front rigidity, offering a practical solution for repair shops that need a part ready for professional installation. Before closing the device, it is recommended to check image, touch, brightness, sensors and frame seating, especially because of the panel size and the adhesive surface of the assembly.

Installation tips

1. Disconnect the battery before handling the screen module.
2. Perform a cold test before removing films, adhesives or protections.
3. Check image, touch, brightness and general response before final assembly.
4. Align the connectors without forcing the flex.
5. Verify that the white frame sits correctly around the entire perimeter.
6. Replace damaged adhesives and clean residues before closing.
7. Apply uniform pressure after mounting to improve the sealing of the assembly.

Technical table