Sub camera lens by Cubot A20 premium quality

Secondary Camera Glass for Cubot A20 Premium Quality

Secondary camera glass for Cubot A20 in Premium quality, designed to replace the external protector corresponding to the auxiliary camera when it presents cracks, scratches, loss of transparency or damage caused by impacts. This replacement part helps restore protection for the secondary camera and prevents dirt or particles from directly reaching the lens. Its format is prepared to fit correctly into the rear camera assembly of the device, providing a precise fit and clean integration with the housing. Designed for professional installation and camera testing before final closure.

Specifications

Secondary camera protective glass.

Compatible with Cubot A20.

Technical model A20.

Located in the rear camera assembly.

External protection for the auxiliary camera.

Premium quality.

Premium quality provides good transparency and precise manufacturing tolerances to correctly protect the secondary camera of the Cubot A20. This glass is suitable for devices with a scratched, cracked, broken or damaged protector, allowing only the affected part to be replaced without working on the camera module when it continues to operate correctly. Its precise fit facilitates firm positioning and helps reduce dust and dirt entry around the lens. It is intended for technical services looking for a clean repair, careful finish and correct protection of the camera system.

Installation Tips

Disconnect the device before starting the repair.

Use ESD protection during handling.

Carefully remove any remains of the previous glass.

Completely remove adhesive residue before installation.

Clean the camera lens before installing the new glass.

Avoid touching the inner side of the glass with your fingers.

Check that no dust particles remain between the camera and the glass.

Perform a camera test before final closure.

Technical Table