Acer Switch 5 SW512-52 spare parts

Acer Switch 5 SW512-52 Technical Characteristics

The Acer Switch 5 SW512-52 is a hybrid device that lets you use it as a laptop or tablet. Below are its major technical specifications:

• Display: 12" IPS touchscreen with a 2160 x 1440 resolution
• Processor: Intel Core i5 (7th Gen) clocked at 2.5 GHz
• Memory: 8 GB DDR4 SDRAM
• Storage: 256 GB SSD
• Graphics: Intel HD Graphics 620
• Operating System: Windows 10 Pro
• Connectivity: HDMI, USB-C, USB 3.0, Bluetooth 4.0
• Camera: 720p HD camera

Acer Switch 5 SW512-52 Replacement Instructions

Here are step-by-step instructions to replace components of the Acer Switch 5 SW512-52:

Tools Needed

• Plastic opening tools
• Phillips #0 screwdriver
• Tweezers

Disassembly

Important: Always remember to unplug your device and turn it off before starting any repair.

• Use the plastic opening tools to gently pry open the case starting from the edges.
• Remove the now-loosened back cover.
• Remove the screws securing the battery using the Phillips #0 screwdriver and carefully disconnect the battery connector from the motherboard.

Component Replacement

Note: The steps will vary depending on the specific component you are replacing (battery, SSD, etc.).

• Remove the screws securing the component you wish to replace (e.g., the SSD or battery).
• Carefully lift the component and unplug any attached cable.
• Install the new component by reversing the removal steps. For instance, attach any necessary cable, place it back on its slot, and secure it with the screws.

Reassembly

Screw back the back cover and push until it clicks into place. Then, turn on the device to check if the replacement was successful.