Asus Transformer Mini T103 spare parts

    There are 3 products.

    Technical Characteristics of Asus Transformer Mini T103 Repuestos

    The Asus Transformer Mini T103 repuestos is a modular system made to replace certain parts of the Asus Transformer Mini T103 tablet.

    • Size: Fits the Asus Transformer Mini T103 tablet precisely
    • Battery: Provides up to 11 hours of usage
    • Screen: 10.1 inches, LED-backlit, with...

    Technical Characteristics of Asus Transformer Mini T103 Repuestos

    The Asus Transformer Mini T103 repuestos is a modular system made to replace certain parts of the Asus Transformer Mini T103 tablet.

    • Size: Fits the Asus Transformer Mini T103 tablet precisely
    • Battery: Provides up to 11 hours of usage
    • Screen: 10.1 inches, LED-backlit, with 1280 x 800 resolution
    • Touchscreen: Fitted with 10-point multi-touch abilities
    • Components: Includes replacement parts for speakers, ports, and internal circuit boards

    Instructions for Replacing Asus Transformer Mini T103 Repuestos

    Tools Needed

    • Phillips screwdriver
    • Plastic pry tool

    Opening the Tablet

    Firstly, you need to open the tablet. To do so, carefully slide the plastic pry tool between the screen and the rest of the device then gradually go along the edge until you feel the clips loosen. Be careful to do this gently to avoid any damages.

    Disconnecting the Battery

    Once the device is open, the first step is to disconnect the battery preventing any electrical damage. You will find the battery cable on the motherboard. Carefully unplug it using the pry tool.

    Replacing the Components

    The specific procedure for replacing the components depends on the part in question. However, the general process is as follows:

    • Locate the faulty part that needs replacement.
    • Use the Phillips screwdriver to unscrew and remove said item.
    • Align the new part in its place & fasten it as needed with the screws.

    Reassembly

    Once you’ve replaced all necessary parts, it's time to reassemble the device. Attach the battery connector back to the motherboard and then carefully align the screen with the back cover, ensuring all clips snap properly into place.

    Remember: be gentle throughout the process to prevent any further damage.

    Less
    More
    Showing 1 - 3 of 3 items