Blackview Tab 6 spare parts

    There are 14 products.

    Technical Details of Blackview Tab 6 Repuestos

    The Blackview Tab 6, also known as Blackview Tab 6 Repuestos, is a highly functional Android tablet with impressive specifications.

    • Operating System: Android 11
    • Display: 10.1 inches, 1200 x 1920 pixels
    • Processor: MediaTek Helio P22T
    • RAM: 4GB
    • Storage: 64GB, expandable up to 128GB
    • Battery: 6580mAh
    • R...

    Technical Details of Blackview Tab 6 Repuestos

    The Blackview Tab 6, also known as Blackview Tab 6 Repuestos, is a highly functional Android tablet with impressive specifications.

    • Operating System: Android 11
    • Display: 10.1 inches, 1200 x 1920 pixels
    • Processor: MediaTek Helio P22T
    • RAM: 4GB
    • Storage: 64GB, expandable up to 128GB
    • Battery: 6580mAh
    • Rear Camera: 13MP
    • Front Camera: 5MP
    • Connectivity: Wi-Fi, Bluetooth, GPS, USB Type-C

    Instructions for Replacing Blackview Tab 6 Repuestos

    Prior to beginning the repair, make sure you have the correct tools and replacement parts and have accessed the inside of the device. The general steps provided below should guide you through the replacement process:

    1. Power Off

    Before starting any repair procedure, ensure to turn off the device to avoid any short circuit.

    2. Remove the Backplate

    Start by removing the backplate using a spudger tool or something similar. This should reveal the inside of the tablet.

    3. Disconnect the Battery

    Find the battery's connector and carefully disconnect it. This will protect your device from accidental power-ups.

    4. Replace the Needed Part

    Determine the part that needs replacement. Carefully remove the defective part. Remember to keep track of all screws and small pieces. Install the new part where the old part was removed.

    5. Reassemble the Tablet

    Once the faulty piece has been swapped out for the new, functioning one, reconnect the battery's cable, and then reattach the backplate.

    6. Power On the Device

    Power on the device to check the functionality of the replaced part. If everything works correctly, the repair is complete.

    Note: The instructions above are a simplistic version of the procedure and should not be attempted without a detailed guide or professional knowledge as it may cause damage to the device.

    Less
    More
    Showing 1 - 14 of 14 items