Huawei MediaPad M1 S8-310U S8-301W repuestos

    There are 4 products.

    Huawei MediaPad M1 S8-310U S8-301W Repuestos: Technical Characteristics

    The Huawei MediaPad M1 S8-310U S8-301W repuestos are the parts and components that are necessary for maintaining the performance and structure of the MediaPad M1.

    • Display: The display component is an 8.0 inches IPS LCD touchscreen with 800 x 1280 pixels resolution.
    • Proces...

    Huawei MediaPad M1 S8-310U S8-301W Repuestos: Technical Characteristics

    The Huawei MediaPad M1 S8-310U S8-301W repuestos are the parts and components that are necessary for maintaining the performance and structure of the MediaPad M1.

    • Display: The display component is an 8.0 inches IPS LCD touchscreen with 800 x 1280 pixels resolution.
    • Processor: The Mediapad M1 uses a Quad-core 1.6 GHz Cortex-A9.
    • Storage: The internal storage include options of 8 GB (for the S8-301W) or 16 GB (for the S8-310U) with 1 GB RAM and a microSD slot for an additional storage of up to 32 GB.
    • Battery: The Battery is a non-removable Li-Po 4800 mAh battery, providing extended hours of tablet usage.
    • Cameras: The Repuestos also include 5 MP AutoFocus rear camera and 1 MP front-facing camera.

    Instructions on How to Replace Huawei MediaPad M1 S8-310U S8-301W Repuestos

    Tools Required

    • Plastic Opening tools
    • Thin prying tool
    • Small Philips Screwdriver

    Steps for Replacement

    Follow the given steps to replace the damaged parts of your Huawei MediaPad M1 S8-310U S8-301W:

    1. Before proceeding, ensure the device is powered off.
    2. Use a plastic opening tool to lever up and remove the back cover. Start from one corner and slowly work your way around the device.
    3. With the back cover removed, several screws should now be visible. Using a small Philips Screwdriver, remove all visible screws.
    4. If you are removing the battery, use a thin prying tool to disconnect the battery connector. Then, carefully pry out the battery using the same tool.
    5. If you are replacing the camera, disconnect the connector for the camera from the motherboard and remove the screws holding it in place.
    6. The display can be removed by disconnecting it from the motherboard and carefully prying it from the front of the device.
    7. After replacing the repuestos, follow these steps in reverse to reassemble your device.

    Always handle the replacement components with care and ensure you have the proper replacement parts for the specific model.

    Less
    More
    Showing 1 - 4 of 4 items