Huawei Mediapad M6 10.8 SCM-W09 SCM-AL09 spare parts

Technical Specifications of Huawei Mediapad M6 10.8 SCM-W09 SCM-AL09

The Huawei Mediapad M6 10.8 SCM-W09 SCM-AL09 comes along with a slew of impressive technical specifications. Below are some of the key features:

• Dimension: 257mm x 170mm x 7.2mm
• Weight: 498g
• Display: 10.8 inches, 2560 x 1600 IPS display
• Chipset: Kirin 980 Octa-core
• RAM & Storage: 4GB RAM and 64GB/128GB storage, expandable via MicroSD
• OS: Android 9.0 (Pie), upgradable to Android 10, EMUI 10
• Battery: 7500mAh
• Camera: 13 MP Rear, 8 MP Front

Instructions for replacing Huawei Mediapad M6 10.8 SCM-W09 SCM-AL09 Repuestos

Replacing parts (Repuestos) of Huawei Medipad M6 requires careful handling. Below are the detailed step by step instructions:

Step 1: Switch off the device

Before commencing any repair or replacement, ensure that the device is completely powered off.

Step 2: Remove the SIM Card tray

Using a SIM Card Ejector, remove the SIM Card Tray out of its slot.

Step 3: Heating the back cover

Use a heat gun or a hairdryer to heat the back cover, it will soften the adhesive that sticks the back cover with the frame. Be careful not to overheat it.

Step 4: Opening back cover

Use a suction cup and plastic pry tool to carefully separate the back cover from the device.

Step 5: Unscrew and lift the shield

Unscrew the overlying shield using a T5 Torx screwdriver, then gently lift the shield.

Step 6: Disconnect the battery and screen cables

Firstly, disconnect the battery cable, followed by the screen cable using a plastic spudger.

Step 7: Swap out the damaged parts

Locate and remove the part that needs to be replaced. Ensure you have all the necessary parts and tools before proceeding to this step.

Step 8: Reassembly

After the damaged part has been replaced, follow the steps in reverse to reassemble the device.

Note: Always make sure to power the device back up after finishing repairs to ensure all parts were replaced correctly.