Huawei Mediapad T3 10 AGS-L09 spare parts

Huawei Mediapad T3 10 AGS-L09 Technical Specifications

The Huawei Mediapad T3 10 AGS-L09 is a versatile tablet with various repuestos (spare parts) that can be replaced. As a comprehensive device, these technical characteristics include the following:

• Display: 9.6 inches, 1280 x 800 pixels
• Processor: Qualcomm MSM8917 Snapdragon 425
• Memory: 2GB/3GB RAM, 16GB/32GB internal storage
• Battery: 4800mAh, non-removable
• Camera: 5MP rear, 2MP front
• Operating System: Android 7.0 Nougat

Instructions for Replacing Huawei Mediapad T3 10 AGS-L09 Repuestos

Follow these steps for a successful replacement. Please note that you will need a set of precision tools for the task.

Initial Preparations

• Switch off the device: To prevent any electric discharge or damage to the system.
• Remove the SIM card and memory card: They could be damaged during disassembly.

Opening the Device

• Use a heat gun: To soften the adhesive holding the back cover.
• Leverage the back cover: Using a plastic opening tool.

Changing Repuestos

• Disconnect relevant ribbon cables: Depends on the repuesto you want to replace, it could be for the battery, display, or the cameras.
• Remove the damaged part: Using a pair of tweezers.
• Install the new part: Carefully place the new part in the appropriate slot and connect the ribbon cable.

Closing the Device

• Reattach the back cover: Apply consistent pressure around the edges for the adhesive to set in.
• Switch on the device: Check that all the functionalities are operational.

Completing these replacement procedures should ensure your Huawei Mediapad T3 10 AGS-L09 is functioning optimally after the repair.